Metric TWP Acetal Washers

Part Number: TWP 36-1

Bowman TWP acetal thrust washers 32 metric sizes range

Details

Inner Diameter	20
Outer Diameter	36
Thickness	1.5

Material Specification

Structure	Acetal copolymer
Static load (N/mm²)	22 max
Sliding speed (m/s)	2 max
Intermittent max temperature (°C)	140 max
Operating temperature (°C)	100 max
Thermal Conductivity (W/mk)	0.31
Hardness (rockwell)	M86
Tensile strength (N/mm²)	70 min
Elongation (%)	30
E-module (N/mm²)	3000

Tolerances & Fittings (Metric)

	Min	Max
Inside Diameter When Fitted	19.8	20.2
Recommended Housing Size	35.8	36.2
Thickness Tolerance	-0.15	0.15

Frequently Asked Questions

If the answer to your question is not listed below, please feel free to give us a call directly on +44 (0)1235 462500 or email us at sales@bowman.co.uk.

What size TWP acetal washers are available?

The TWP acetal thrust washer range is available in a variety of standard metric dimensions. The specific inside diameter, outside diameter, and thickness vary by product designation. Refer to the acetal washer size chart on this page for the available options.

What is the difference between TWP 30 and TWP 30-1?

TWP product designations identify different washer dimensions within the range. TWP 30 and TWP 30-1 have different dimensional specifications, so the correct option should be selected based on the required inside diameter, outside diameter, and thickness.

What thickness are TWP acetal washers?

TWP washer thickness varies according to the specific product designation and size. The available dimensions are listed in the product table, allowing you to compare the metric acetal washer sizes and select the appropriate thickness for your application.

How do I select the right TWP washer size?

Consider the required shaft or mating diameter, available space, outside diameter, washer thickness, operating conditions, and application load. The acetal washer size chart can then be used to identify a suitable standard washer from the TWP range.

Can Bowman make custom TWP washer sizes outside the standard range?

Yes. If a standard TWP washer does not meet your dimensional requirements, Bowman can assess custom requirements and provide a suitable solution. Contact our team with your required dimensions and application details for assistance.

Looking for a custom size or special specifications?

Whether you need standard or custom options, we’re here to help. Reach out now and let’s find the perfect match!

Bowman International Group

Thank you for submitting the form