Bowman Bearing Selector

The Bowman Bearing Selector

The Bowman Bearing Selector has been developed to assist you in selecting the correct bearing for your project. This bearing selector reduces the uncertainty when selecting bushes and you can rest assured that whether you are in the design process or replacing a bearing in an existing application that you have selected the right one. The Bowman Bearing Selector will search our entire product range and select the bearing that corresponds to a set of parameters that you enter into it.

If you already know which bearing you need, you can use the bearing selector to review the technical information on that particular bearing. The bearing selector will show you the tolerances, load ratings, maximum speed, material information and much more.

How to use the Bowman Bearing Selector

  1. Enter your application parameters
  2. Click on one of the suggested bearings that meets your criteria to view the datasheet
  3. Give us a call on 01235 462500 or email us on sales@bowman.co.uk to receive your order within 24 hours!

Step One – Find a bearing

Select Product

Measurements

mm
mm
mm

Speed and Load

rpm
kg

Step Two – Selected Bearing

Flanged Bearing

Oilite®

Metric Oilite® Flanged Bearing

Part number: AL 42 52 40

Details

Inner Diameter 42
Outer Diameter 52
Length 40
Tolerance Range UK Standard
Flange Thickness 5
Flange Diameter 62

Material Specification

Structure Oil impregrated sintered bronze*
Max PV (N/mm² x m/s) 1.8
Max Static load (N/mm²) 50
Max Dynamic load (N/mm²) 14
Max Sliding speed (m/s) 5
Operating temperature (°C) -60 to 200*
*dependant on lubrication
Density (g/cm³) 6.6
Radial crushing strength (K Min M/mm²) 160

Tolerances & Fittings (Metric)

Min Max Tolerance
Inside Diameter 42.009 42.048 G8
Outside Diameter 52.053 52.099 s8
Overall Length 39.805 40.195 js13
Flange Thickness Tolerance 4.910 5.090 js13
Flange Diameter Tolerance 61.770 62.230 js13
Recommended Housing Size 52.000 52.030 H7
Shaft Diameter 41.950 41.975 f7
Fitting Pin Size 42.009 42.020 m5
Concentricity Max 0.120 0.120 IT10
Inside Diameter When Fitted 42.000 42.025 H7

PV Calculation

Values Maximum
rpm 2273.642 rpm
kg 8562.691 kg
PV Factor N/mm² x m/s 1.8 N/mm² x m/s

Found what you are looking for?

Call us +44 (01235) 462500 or Contact us ›

Looking for something specific? Call us +44 (0) 1235 462500 or

Contact us ›