Bowman Bearing Selector

The Bowman Bearing Selector

The Bowman Bearing Selector has been developed to assist you in selecting the correct bearing for your project. This bearing selector reduces the uncertainty when selecting bushes and you can rest assured that whether you are in the design process or replacing a bearing in an existing application that you have selected the right one. The Bowman Bearing Selector will search our entire product range and select the bearing that corresponds to a set of parameters that you enter into it.

If you already know which bearing you need, you can use the bearing selector to review the technical information on that particular bearing. The bearing selector will show you the tolerances, load ratings, maximum speed, material information and much more.

How to use the Bowman Bearing Selector

  1. Enter your application parameters
  2. Click on one of the suggested bearings that meets your criteria to view the datasheet
  3. Give us a call on 01235 462500 or email us on sales@bowman.co.uk to receive your order within 24 hours!

Step One – Find a bearing

Select Product

Measurements

mm
mm
mm

Speed and Load

rpm
kg

Step Two – Selected Bearing

Flanged Bearing

Oilite®

Metric Oilite® Flanged Bearing

Part number: AL 60 75 60

Details

Inner Diameter 60
Outer Diameter 75
Length 60
Tolerance Range UK Standard
Flange Thickness 8
Flange Diameter 85

Material Specification

Structure Oil impregrated sintered bronze*
Max PV (N/mm² x m/s) 1.8
Max Static load (N/mm²) 50
Max Dynamic load (N/mm²) 14
Max Sliding speed (m/s) 5
Operating temperature (°C) -60 to 200*
*dependant on lubrication
Density (g/cm³) 6.6
Radial crushing strength (K Min M/mm²) 160

Tolerances & Fittings (Metric)

Min Max Tolerance
Inside Diameter 60.010 60.056 G8
Outside Diameter 75.059 75.105 s8
Overall Length 59.770 60.230 js13
Flange Thickness Tolerance 7.890 8.110 js13
Flange Diameter Tolerance 84.730 85.270 js13
Recommended Housing Size 75.000 75.030 H7
Shaft Diameter 59.940 59.970 f7
Fitting Pin Size 60.011 60.024 m5
Concentricity Max 0.120 0.120 IT10
Inside Diameter When Fitted 60.000 60.030 H7

PV Calculation

Values Maximum
rpm 1591.549 rpm
kg 18348.62 kg
PV Factor N/mm² x m/s 1.8 N/mm² x m/s

Found what you are looking for?

Call us +44 (01235) 462500 or Contact us ›

Looking for something specific? Call us +44 (0) 1235 462500 or

Contact us ›